Furuno GP-1850D - Manual (Page 84)

A-2
1
CONFIGURATION SETUP NMEA PORT 1
SETUP NMEA/DGPS PORT 2
FORMAT
(NMEA0183Ver.1.5, 2.0)
LAT/LON FORMAT
(DD
° MM.MM’, DD ° MM.MMM’, DD ° MM.MMMM)
FORMAT
(NMEA0183Ver.1.5, 2.0, RTCM104EX, RTCM104INTRN,
RTCM104OUT)
LAT/LON FORMAT
(DD
°
MM.MM’, DD
°
MM.MMM', DD
°
MM.MMMM)
SELF TEST (MEMORY, I/O; KEYBOARD;
TEST PATTERN, REMOTE CONTROLLER
TEST)
DEMONSTRATION MODE
MEMORY/TRIP CLEAR
DOWNLOAD WAYPOINT/RTE TO PC
UPLOAD WAYPOINT/RTE FROM PC
SAVE DATA TO MEMORY CARD
LOAD DATA TO MEMORY CARD
SELECT SNTNC. soft key (AAM, APB, BOD, BWC/BWR, GGA, GLL,
RMA, RMB, RMC, VTG, WPL, XTE, ZDA)
UPLOAD/DOWNLOAD DATA
SYSTEM MENU
WPT/RTE key
WAYPOINTS
ROUTES
LOG
CREATE VOYAGE BASED ROUTE
LOCAL LIST
ALPHA/NUMERIC LIST
WAYPOINT BY CURSOR
WAYPOINT BY RANGE & BEARING
ALARM key
AUDIO ALARM (ON, OFF)
ARRIVAL ALARM (ON, OFF)
ANCHOR ALARM (ON, OFF)
PROXIMITY ALARM (ON, OFF)
XTE ALARM (ON, OFF)
SPEED ALARM (WITHIN, OVER/UNDER, OFF)
CLEAR PLOTTER MEMORY (NO, YES)
CLEAR GPS MEMORY (NO, YES)
CLEAR ALL MEMORY (NO, YES)
TRIP METER RESET (NO, YES)