Furuno GP-1650WD - Manual (Page 7)

v
SYSTEM CONFIGURATION
Ship's mains
12-24 VDC
External equipment
(Autopilot, etc.)
DGPS beacon receiver
(GP-1650W only)
ANTENNA UNIT
Receives signal from
GPS satellite and beacon
reference station.
(GP-1650WD only)
DISPLAY UNIT
GPA-017
(GP-1650W)
GPA-019
(GP-1650WD)
Rectifier
PR-62
Ship's mains
100/110/115/220/230 VAC
1 , 50/60 Hz
This GPS receiver complies with Canadian standard RSS-210 (Low Power
License-Exempt Radio communication Devices).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.