Falcon 4400 - Manual (Page 21)

Entering Data
Quick Reference Guide 19
Radio Card Setup
Windows Zero Config should be used to administer the radio setup. For assis-
tance in configuring the radio card, reference the online help on your Falcon.
Go to
> Help for further information.
Entering Data
To open an application, tap a link on the Today page, or tap > Programs to
display a list of available programs. Tap a program icon to open it.
There are several ways to enter data with the Falcon:
• Use the keypad. Refer to Keypads starting on page 26 .
• Use the stylus on the touchscreen display. Refer to Using the Stylus on
page
20 for more information on using the stylus.
• Use the on-screen keyboard by typing with the stylus. Refer to On-
Screen Keyboard on page
24 .
• Select text. Use the stylus to highlight the desired text by dragging the
stylus across the desired text, double-tapping to select one word, and
triple-tapping to select an entire paragraph.
• Use the bar code scanner or imager to enter data. Press the trigger or
scan button (26 or 52-key only) to initiate a scan. The scanned data
will be entered into the current application’s open file. Refer to Scan-
ning Bar Codes starting on page
33 for more information on using
the scanner.
• If your Falcon has the 2D Imaging module installed, you can read and
decode traditional linear bar codes (1D), 2D and composite symbols,
and some OCR fonts. You can also capture images such as signatures,
labels, and other items. See Bar Code Scanning with 2D Imager start-
ing on page
35 for further information.