Fluke 233 - Manual (Page 7)

True-rms Remote Display Digital Multimeter
Safety Information
5
Table 1. Electrical Symbols
B AC (Alternating Current) J Earth ground
F DC (Direct Current) I Fuse
X Hazardous voltage P Conforms to European Union directives.
W
Risk of Danger. Important information.
See Manual.
)
Conforms to relevant Canadian Standards
Association directives.
 Battery. Low battery when shown. T Double insulated
R Continuity test or continuity beeper tone. E Capacitance
CAT
III
IEC Measurement Category III
CAT III equipment has protection against
transients in equipment in fixed-
equipment installations, such as
distribution panels, feeders and short
branch circuits, and lighting systems in
large buildings.
CAT
IV
IEC Measurement Category IV
CAT IV equipment has protection against transients
from the primary supply level, such as an electricity
meter or an overhead or underground utility service.
~
Do not discard this product as unsorted
municipal waste. Go to the Fluke website
for recycling data.
O Diode
®
Examined and licensed by TÜV Product
Services. ;
Conforms to relevant Australian standards.