Fisher-Price JEEP HURRICANE N2273 User Manual

Page 16

Advertising
background image

N2273pr-0920

16

• Align the tabs on a hubcap with the slots in a wheel. “Snap”

a hubcap into the center of each wheel.

• Turn the vehicle upright.

30

Hubcaps

Hubcaps

32

• While pressing down on the steering wheel, grasp the steering

column under the dash and pull it up as far as it will go.

• Insert the

" x 1½" pin through the hole in the end of the

steering column.

• Grasp the steering column again under the dash. Pull the

steering column down to fit the pin into the grooved area
in the center of the steering wheel.

Press Wheel

Press Wheel

Lift Steering

Lift Steering

Column

Column

Press Wheel

Lift Steering

Column

5

/

32

32

" x 1½" Pin

" x 1½" Pin

• Position the steering wheel so that the tab is upright.
• Fit the steering wheel onto the end of the steering column.

31

Steering

Wheel Tab

Steering

Column

INSIDE VIEW

28

• Fit a wheel retainer onto the end of the rear axle.

Wheel Retainer

• Insert a screw through the large opening in the wheel retainer

and the hole in the rear axle. Tighten the screw.

• Push the axle into the wheel as far as it will go.
• Repeat this procedure to assemble the other rear wheel to the

other end of the rear axle.

29

5

/

32

" x 1½" Pin

Advertising
This manual is related to the following products: