Furuno GP-1850 - Manual (Page 9)

9
Error message
Memory card not inserted
Press the [ENTER] key to return to the SAVE
DATA display.
MEMORY CARD NOT
INSERTED. INSERT CARD
PRESS "ENTER" key
TO CONTINUE.
NOT INSERTED message
Unformatted memory card
Press the [ENTER] key to return to the SAVE
DATA display. And format it refering to the
previous page.
MEMORY CARD NOT
FORMATTED
PRESS "ENTER" key
TO CONTINUE.
NOT FORMATTED message
Wrong card inserted
Appears when a chart card is inserted. Press
the [ENTER] key to return to the SAVE DATA
display. Replace it with a formatted memory
card.
WRONG CARD INSERTED.
INSERT MEMORY CARD.
PRESS "ENTER" key
TO CONTINUE.
WRONG CARD message
Data overwrite
Data type to be recorded exists on memory
card. (Two or more of same data type can-
not be recorded.) Press the [ENTER] key to
overwrite same data type on the card, or
press the [CLEAR] key to escape.
OVERWRITE FOLLOWING
DATA. OK?
YES ... "ENTER" key
NO ... "CLEAR" key
(TRACK)
OVERWRITE message
3 Loading Data from
Memory Card
Data (track, marks, waypoints, configuration)
can be loaded from a memory card and dis-
played on the screen. This feature is useful
for observing past data and setting up the
equipment for a specific purpose (with “con-
figuration”).
1. Press the [MENU] key followed by the soft
keys CONFIGURATION and UPLOAD/
DOWNLOAD DATA.
2. Press the soft key LOAD DATA FROM
MEMORY CARD to show the LOAD DATA
display.
DGPS 3D
LOAD
DATA
EDIT
TRACK
MARK/LINE
WAYPOINT/ROUTE
CONFIGURATION
OFF
OFF
OFF
OFF
RETURN
s
LOAD
DATA
LOAD DATA display
3. Press ▲ or ▼ to select item to load.
4. Press the soft key EDIT to show the
ON/OFF selection window.
5. Press ▲ to select ON. Press the soft key
ENTER or the [ENTER] key. If the
memory card does not contain the item
selected, the buzzer sounds and ON can-
not be selected.