FRIGIDAIRE Coin- Operated Commercial Tumble Action Washer - Manual (Page 8)

8
8
(2) Slide Stop
Screws
FIGURE 3
(1) Receiver Block Screw
Spare Parts
Compartment
and Screw
Coin Receiver
Block
FIGURE 4
FIGURE 5
FIGURE 6
NOTE:
Black
colored
slots are
closed off
by block-
out key.
• Pull coin slide out of coin chute (see FIGURE 4).
STEP 4
Turn coin slide upside down and remove screw that holds coin receiver
block (see FIGURE 5).
STEP 5
Remove coin receiver block from coin slide (see FIGURE 6):
• Turn coin slide right side up. Keep coin receiver block in place with
your fingers.
• Carefully lift coin slide from coin receiver block. If necessary, shake
coin slide gently to loosen block.
STEP 3
Remove coin slide from coin chute:
• Unhook and remove the coin slide return spring. (see FIGURE 2).
• Turn coin slide mechanism upside down.
• Remove coin slide stop by taking out two screws to the chute bottom
(see FIGURE 3).
Ratchet
Dog and
Spring
Block-Out
Keys
FIGURE 8
FIGURE 7
VEND
PRICE COIN SLOTS
1 2 3 4 5 6 7 8
$.10
0
$.20
$.25
$.35
$.45
$.50
$.60
$1.00
$2.00
$1.10
$1.25
$1.35
$1.50
$1.60
$1.75
$1.85
$1.70
$1.45
$1.20
$.95
$.85
$.75
$.70
TABLE OF VEND PRICE
To remove block-out keys, pull straight up.
NOTE: Be sure block-out keys and /or dime inserts are
seated properly and ratchet dog is in place with irs spring
connected (see FIGURE 8).
Be sure the proper coin sizing block is in place.
STEP 6
Set new vend price by adding or removing the appropriate
block-out keys and/or dime inserts according to th Table
of Vend Prices
(see FIGURE 7).