Tailgate lock (if equipped), Tailgate removal, Tailgate – FORD 2005 F-150 User Manual

Page 82: Driver controls

Advertising
background image

Compass calibration adjustment

Perform this adjustment in an open area free from steel structures and
high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.

1. Start the vehicle.

2. To enter the compass calibration
mode, press and hold the button for
greater than eight seconds. The
display will then show CAL in the
display window.

3. Drive the vehicle slowly (less than 3 mph [5 km/h]) in circles until
CAL indicator turns off. As many as 5 complete circles may be required.

4. The compass is now calibrated.

TAILGATE LOCK (IF EQUIPPED)

Your vehicle may be equipped with a
tailgate lock designed to prevent
theft of the tailgate.
• Insert ignition key and turn to the

right to engage lock.

• Turn ignition key to the left to

unlock.

TAILGATE REMOVAL

Your tailgate is removable to allow
more room for loading.

1. Lower the tailgate.

2. Use a screwdriver to pry the
spring clip (on each connector) past
the head of the support screw.
Disconnect cable.

3. Disconnect the other cable.

4. Lift tailgate to a 45–degree angle
from horizontal.

2005 F-150 (f12)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

82

Advertising
This manual is related to the following products: