FRIGIDAIRE 318205317 - Manual (Page 11)

11
SETTING OVEN CONTROLS - MODEL B
to set the clock
When the range is first plugged in, or when the power
supply to the appliance has been interrupted, the display
will flash "12:00".
1. Push CLOCK pad.
2. Within 5 seconds, push and hold the uP or doWn
arroW pad until the correct time of day appears in
the display.
note: The clock cannot be changed during any timed
bake or self-clean cycle.
to set the minute timer
1. Push TIMER ON/OFF pad.
2. Push the uP arroW pad to increase the time in
one minute increments. Push and hold the uP ar-
roW pad to increase the time in 10 minute incre-
ments. The timer can be set for any amount of time
from 1 minute to 11 hours and 59 minutes.
note: If you push the doWn arroW pad first, the
timer will advance to 11 hours and 59 minutes.
3. The display shows the timer count down in minutes
until one minute remains. The display will count
down in seconds.
4. When the set time has run out, the timer will beep
3 times. It will continue to beep 3 times every 60
seconds until the TIMER ON/OFF pad is pushed.
 note
The oven function will not work if the time of day clock
is not set.
 note
The minute timer does not start or stop cooking. It serves
as an extra timer in the kitchen that will beep when the set
time has run out. The minute timer can be used alone or
during any of the other oven functions. When the minute
timer is in use with any other mode, the minute timer will
be shown in the display. To view other functions, push
the function pad for that mode.
 note
To turn the time of day display OFF or ON in the display
press and hold the CLOCK pad for 8 seconds (the control
will beep once) and then release. This feature does not
remove the set time of day from the memory of the
control. When the display is turned OFF the time of day
will reappear for a few seconds any time the CLOCK
pad is touched.
to change the minute timer while it is in use:
While the timer is active and shows in the display, push and
hold the UP or DOWN ARROW pad to increase or decrease
the time.
to cancel the minute timer before the set time has
run out: Push TIMER ON/OFF pad.
to set control for continuous Bake or 12
Hour Energy Saving
The oven control has a built-in 12 hour Energy Saving
feature that will shut off the oven if the control is left on
for more than 11 hours and 59 minutes. The oven can
be programmed to override this feature for continuous
baking.
to set control for continuous baking:
1. Push and hold TIMER ON/OFF pad down for 5
seconds until tone is heard, "— — hr" will appear in
display for continuous cooking. The current time of
day will return to the display.
2. To cancel the Continuous Bake Function, push TIMER
ON/OFF pad and hold for 5 seconds until tone is
heard. "12hr" will appear in display indicating that
the control has returned to the 12 hour Energy
Saving feature.
To Set Control for Oven Lockout
The control can be programmed to lock the oven door
and inactivate the oven controls.
To Set Control for Oven Lockout feature:
1. Push the CLEAR OFF pad and hold for 3 seconds.
"Loc" will appear in display, the "Door Locked"
indicator light will flash and the motor driven door
lock will begin to close automatically. DO NOT open
oven door while the indicator light is flashing. Allow
about 15 seconds for the oven door to lock. Once
the oven door is locked, the current time of day will
appear in the display.
2. To cancel the lockout feature, push CLEAR OFF pad
and hold for 3 seconds. The control will unlock the
oven door and resume normal operation.
 note
If a control pad is pressed while the Oven Door/Control
Lockout mode, “Loc” will appear in the display until
the control pad is released. But it does not disable the
clock, kitchen timer and the interior oven lights.