Fisher-Price B1637 - Manual (Page 8)

• While holding the seat wire in place, carefully turn the
seat around so that the front of the seat faces you.
• Position the seat wire cap so that the rounded edge
is upright.
• Fit each end of the seat wire through the hole in each
seat wire cap.
Ends of
Seat Wire
Assembly
• Turn the seat face down.
• Fit an accessory bin into the groove on each side of the
seat, as shown.
• Insert two #8 x 1 3 /
8
" screws into each accessory bin
and tighten.
8
Seat Wire
Cap
Seat Wire
Cap
Grooves
Seat
Accessory Bin
Accessory Bin
18
20
• Lift the seat tubes slightly.
• With the seat wire hanging down, insert the ends of the seat
wire through the slots in the seat, as shown.
Slots
Seat Wire
17
#8 x 1 3 /
8 ” Screw - 4
Shown Actual Size
Seat Wire
Cap Hole
Rounded Edge Up
19
• Press the seat wire caps
into place.
• Insert two #6 x 5 /
8
" screws
through each seat wire cap
and tighten.
Seat Wire
Caps
Seat Wire is
Through Hole in
Seat Wire Cap
Press in Place
#6 x 5 /
8
" Screw - 4
Shown Actual Size
Hint: The seat wire caps are designed to fit into the seat only one
way. If the screw holes in the seat wire caps do not align with the
holes in the seat, try switching the seat wire caps onto the
opposite ends of the seat wire.