FujiFilm FinePix A120 - Manual (Page 37)

73 72
Notes on the xD-Picture Card™
■ Image Memory Card
h This Image Memory Card is a new image recording
media (xD-Picture Card) developed for digital
cameras. The Image Memory Card consists of a
semiconductor memory (NAND-type flash memory)
to record digital image data.
The recording process is electrically performed and
enables erasure of existing image data as well as re-
recording of new image data.
h When using a new Memory Card, or a Memory Card
that has been formatted by a PC, be sure to format
the card with your digital camera before using it.
■ Protecting Your Data
h Images and movies may be lost or destroyed in the
following situations. Please note that FUJIFILM
assumes no responsibility for data that is lost or
destroyed.
1. Removal of the memory card or turning the power
off while the memory card is being accessed (i.e.,
during record, erase, initialization, and playback
operations).
2. Improper handling and use of the memory card by
the user or third party.
h Save your important data to another media (i.e., MO
disk, CD-R, hard disk, etc.).
■ Handling xD-Picture Card
h When storing xD-Picture Cards, make sure that
they are kept out of the reach of children. An xD-
Picture Card could be swallowed cause suffocation.
If a child swallows an xD-Picture Card, seek
medical attention or call emergency number right
away.
h When inserting the xD-Picture Card into the
camera, hold the xD-Picture Card straight as you
push it in.
h xD-Picture Card are precision electronic devices.
Do not bend, drop or otherwise subject the xD-
Picture Card to strong force or shocks.
h Do not use or store xD-Picture Card in hot humid
places or in places where they are exposed to
corrosive substances.
h Clean the xD-Picture Card with a soft dry piece of
cloth when dirty.
h When carrying or storing an xD-Picture Card, keep
it in the special protective case.
h The xD-Picture Card will work well for long time, but
will sooner or later lose its ability to store and play
back images or movies. If this happens replace it
with a new xD-Picture Card.
h Never remove the xD-Picture Card or turn the
camera off during data recording or erasing (xD-
Picture Card formatting) as this could be damaged
to the xD-Picture Card.
h The use of xD-Picture Cards is recommended with
the FinePix A120.
The recording quality cannot be guaranteed when
an xD-Picture Card other than those manufactured
by FUJIFILM are used.
h The xD-Picture Card may feel warm when it is
removed from the camera after taking pictures. This
is normal.
h Do not put labels on the xD-Picture Card. Peeling
labels can cause the camera not to work properly.
■ Using xD-Picture Card with a PC
h When you take pictures using an xD-Picture Card
that has been used on a PC, reformat the xD-
Picture Card using your camera for best quality.
h When you format an xD-Picture Card, a directory
(folder) is created. Image data is then recorded in
this directory.
h Do not change or delete the directory (folder) or file
names on the xD-Picture Card because this will
make it impossible to use the xD-Picture Card in
your camera.
h Always use the camera to erase image data on an
xD-Picture Card.
h To edit image data, copy the image data to the PC
and edit the copy.
h Do not copy files other than those that will be used
by the camera.
■ Specifications
Type Image memory card for digital
cameras (xD-Picture Card)
Memory type NAND-type flash memory
Conditions for use Temperature:
0°C to +40°C
(+32°F to +104°F)
Humidity:
80% max. (no condensation)
Dimensions 25 mm × 20 mm × 2.2 mm
(0.98 in. × 0.79 in. × 0.09 in.)
(W × H × D)
Power Supply and Batteries
1 Press “d” or “c” to move to option 3 and then
press “a” or “b” to select “DISCHARGE”.
2 Press “c”.
2
0 1 0 2
Procedure for discharging rechargeable Ni-MH batteries
The “Discharging rechargeable batteries” function can only be used with Ni-MH
batteries.
The “Discharging rechargeable batteries” function should not be used with
alkaline batteries as it will completely drain the battery charge.
Use the “Discharging rechargeable batteries” function in the following situations:
i When the batteries can only be used for a short time after being charged normally
i When the batteries have not been used for a long period
i When you purchase new Ni-MH batteries
Do not use the “Discharging rechargeable batteries” function while using the AC power adapter. In
these situations, the Ni-MH batteries will not be discharged due to the external power supply.
1 1 Press the “MENU/OK” button.
2 Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “SET-UP”.
3 Press the “MENU/OK” button.
0 1 0 3 0 2
● ! Do not use the procedure for discharging
rechargeable batteries with alkaline batteries.
1 Press “d” or “c” to select “OK”.
2 Press the “MENU/OK” button.
The screen changes and discharging begins.
When the battery level indicator blinks red and
discharging ends, the camera turns off. 3
0 1 0 2
● ! To cancel discharging, press the “DISP/BACK” button.