Meridian Audio 808.2 - Manual (Page 29)

25
Installing the CD
player
To connect to two-channel DSP loudspeakers using SpeakerLink (Type 1 or 2) Type 1 or 2)
MERIDIAN
SPEAKERLINK
DSP loudspeaker – Slave
Meridian 808.2 CD Player
DSP loudspeaker – Master
SpeakerLink lead
SpeakerLink lead
MERIDIAN
SPEAKERLINK
MERIDIAN
COMMS
DIGITAL
INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT
MERIDIAN
SPEAKERLINK
MERIDIAN
COMMS
DIGITAL
INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT
The 808.2/808.2i can be connected directly to
Meridian DSP loudspeakers to create a complete
compact stereo system, with volume and other
preamplifier controls provided by the loudspeakers
via the MSR+ or the front panel. The 808.2i provides
additional analogue and digital inputs allowing you to
use it to control the other sources in your system.
The Meridian SpeakerLink connection provides both
two-channel digital audio and Meridian Comms control.
Connect the SpeakerLink output from the CD player
to the SpeakerLink input on the DSP loudspeaker
chosen as the master, using a SpeakerLink lead. •
Connect the SpeakerLink output from the master
DSP loudspeaker to the SpeakerLink input on the
other (slave) DSP loudspeaker, using a second
SpeakerLink lead.
Configure the loudspeakers as described in the
Meridian DSP Loudspeaker User Guide.
Configure to Type 1 if using an 808.2 or 808.2i with
no external inputs, or Type 2 for an 808.2i with other
inputs in use; see
Choosing a standard setting,
page 30.
•
•
•