Final Sound Final 300i - Manual (Page 21)

FINAL SOUND 300i Loudspeaker Manual vs. 1.3 -US- c FS 2007RJ 21
.
Huge stereo stage: The application of the patented inverter technology will bring a wide stereo stage,
without the ‘hot spot’ traditional electrostatic loudspeakers are known for.
Easy amplifier match: The inverter technology will raise the impedance to values comparable with most
dynamic loudspeakers in the market. You can drive any Final electrostatic loudspeaker with any good
amplifier, delivering between 35-100 watt power.
Sound: Final electrostatic loudspeakers do have a low distortion, good dynamic behaviour, neutrality,
speed, clarity and low level resolution.
Design: Final electrostatic loudspeakers are basically elegant flat panels and they combine perfectly
with flat panel screens and televisions.
Any size: The Final family of electrostatic loudspeakers starts with small high definition panels for
smaller rooms and customers on a tight budget. The smaller models do have the same socic qualities
as the larger panels.
Modular and flexible: Although Final Sound can provide you with standard home theatre packages, you
can basically build theatre and sound systems with any combination of panels. It can suit your tastes,
your room size and your budget.
Specially designed subwoofers: Most of our electrostatic loudspeaker panels need a subwoofer. Final
Sound offers a family of subwoofers which are matched perfectly in terms of speed, articulation,
dynamic behaviour and power output.
Placement: depending on the panel’s size and application, we deliver footplates, floor stands, set tops
and wall mounts.
Does a Final Sound flat-panel loudspeaker get dirty?
Yes it does, just as every other object in your room, but it depends for a great deal on the place where
the loudspeakers are situated. Next to the fireplace or the kitchen are places we do not recommend.
You should appreciate that a Final Sound electrostatic loudspeaker is not covered, because that would
be detrimental to the sound. Come to that, a little dust is not a problem since the stators can easily be
cleaned with a vacuum cleaner (see instructions in this manual).
What about funny noises your flat-panel loudspeakers might produce?
Funny noises can occur sometimes when you listen closely to the panels. These are normal to
electrostatic loudspeakers in general, and are absolutely harmless. These do not affect the
loudspeaker or the audio-system. Wheather circumstances are mostly responsible for any electrostatic
loudspeaker producing some noises.
How long does a Final Sound flat-panel loudspeaker last?
Electrostatic loudspeakers have been on the market since 1935, although materials allowing for an
optimization of the technology have only become available in the last 10 years. Final Sound uses
diaphragms that last a great many years. Final Sound is constantly involved in research to further
improve its technology.
Could my children, pets, or myself be shocked by the high-voltage present in the flat-panel
loudspeakers?
No. Whilst your Final Sound loudspeaker systems are indeed connected to a power supply, they have
excellent insulation. When you remove your sweater in the winter, its electrostatic charge will be
considerably greater than the charge on the diaphragm in a Final Sound loudspeaker. But of course,
you should not open the loudspeaker, nor repair them. Only your authorized Final Sound service
technician, who is professionally trained in the workings of all Final Sound products, should carry out
this work. We stress not to touch any product that is connected to the power supply, during operation.