O self-timer/remote controller lamp – FujiFilm NEXIA 3100IXZ MRC User Manual

Page 36

Advertising
background image

36

The self-timer lamp will begin to blink approximately
seven seconds after being illuminated, and the
shutter will be released approximately three seconds
after that.
Subsequent self-timer exposures will be taken at
intervals of between three to six seconds when two
or three consecutive self-timer exposures have been
set.

✻ Do not press the shutter release button while

standing in front of the camera. This may cause a
focusing error or underexposure.

✻ If you want to cancel the self-timer mode, press

the

r button again to extinguish the sign r in

Liquid Crystal Display.

✻ The self-timer mode will be automatically

canceled after the exposure has been taken and
when the power is switched off.

Fig. 53

Advertising