FujiFilm MP-300 - Manual (Page 19)

36 37
Advanced Printing Advanced Printing
Simply by pressing the REPRINT button, you
can print as many copies as you like of the last
image printed.
x If the power is cut, the last image is stored.
x Transferring a new image overwrites the stored image.
x This function cannot be used with USB communication.
x When the printer is connected to a digital camera (when the PictBridge lamp
is lit), you cannot use the reprint function. Disconnect the USB cable and wait
until the PictBridge lamp is off before using this function.
x Color tones may change slightly in continuous printing.
Lit Lit
x If the printer is turned off, turn it on.
Check that the printer is
turned on.
x If there is no image stored in the
printer’s memory, the ERROR lamp
blinks 3 times. (P.41)
Press the REPRINT button.
Lit (POWER button)
Take the film out when film
output ends.
REPRINT
1 1
2 2
3 3
When the printer is turned off, hold
down the REPRINT button as you
turn the printer on. This erases the
stored image.
Blinking Blinking Lit Lit
Turn off
x If the printer is turned on, turn it off.
x When the printer is turned off, all the
lamps are off.
Check that the printer is
turned off.
1 + 2 Hold down the REPRINT button
as you press the POWER button.
Erasing the stored image
1 1
2 2
When the POWER button lights
and the ERROR lamp blinks
once, erasing is completed.