Controls and features – FORD 1998 E-150 User Manual

Page 32

Advertising
background image

• structures around the vehicle
• other vehicles parked next to the vehicle
To replace the batteries:

1. Twist a thin coin between the two
halves of the transmitter near the
key ring. DO NOT TAKE THE
FRONT PART OF THE
TRANSMITTER APART.

2. Place the positive (+) side of new
batteries down. Refer to the diagram
inside the transmitter unit.

3. Snap the two halves back
together.

Replacing lost transmitters

Take all your vehicle’s transmitters
to your dealer for reprogramming if:
• a transmitter is lost or
• you want to purchase additional

transmitters (up to four may be
programmed).

To reprogram the transmitters, place
the key in the ignition and switch
from OFF to ON five times in rapid
succession (within 10 seconds).
After doors lock/unlock, press any button on all transmitters
(up to four). When completed, switch the ignition to OFF.

All transmitters must be programmed at the same time.

Reprogramming transmitters

To reprogram all transmitters, place the key in the ignition and switch
from OFF to ON eight times in a row (within 10 seconds). After doors
lock/unlock, press any button on all transmitters (up to four). When
completed, switch the ignition to OFF.

All transmitters must be reprogrammed at the same time.

LOCK

UN

LOCK

PANIC

Controls and features

32

Advertising
This manual is related to the following products: