FRIGIDAIRE 819042150-01 - Manual (Page 8)

Fan
Faster Fan
Faster Fan
Slower Fan
Slower
Temp/Timer Temp/Timer
AUTO AUTO
Fan
Faster Fan
Faster Fan
Slower Fan
Slower
Temp/Timer Temp/Timer
AUTO AUTO
Fan
Faster Fan
Faster Fan
Slower Fan
Slower
Temp/Timer Temp/Timer
AUTO AUTO
Fan
Faster Fan
Faster Fan
Slower Fan
Slower
Temp/Timer Temp/Timer
AUTO AUTO
Fan
Faster Fan
Faster Fan
Slower Fan
Slower
Temp/Timer Temp/Timer
AUTO AUTO
Fan
Faster Fan
Faster Fan
Slower Fan
Slower
Temp/Timer Temp/Timer
AUTO AUTO
Air Conditioner Features
(continued)
TIMER: DELAY STOP/START FEATURE: YOU WILL SEE:
DO THIS:
PRESS TIMER
BUTTON
SLEEP FEATURE: YOU WILL SEE:
DO THIS:
PRESS
SLEEP
BUTTON
NOTE: In this “ MODE “ the selected temperature will increase by 2 F 30
minutes after the mode is selected. The temperature will then increase by
another 2 F after an additional 30 minutes. This new temperature will be
maintained for 7 hours before it returns to the originally selected
temperature. This ends the “ Sleep “ MODE and the unit will continue to
operate as originally programmed. The “ Sleep” MODE program can be
cancelled at any time during operation by again pressing the “ Sleep”
button.
CHECK FILTER FEATURE: YOU WILL SEE:
NOTE: This feature is a reminder to clean the Air Filter (See Care and
Cleaning) for more efficient operation. The LED (light) will illuminate after
250 hours of operation. To reset after cleaning the filter, press the “Check
NOTE: For Delay Stop, the unit must be in the ON position.
LIGHT ON
LIGHT ON
LIGHT ON
THEN DO THIS:
PRESS UP ( ) OR
DOWN ( ) BUTTON
8
NOTE: For Delay Start, the unit must be in the OFF position. To adjust
timer setting, tap or hold the UP arrow ( ) or the DOWN arrow ( ) to
change delay timer at .5 hour increments, up to 10 hours, then at 1 hour
increments up to 24 hours. The control will count down the time
remaining until start (8, 7.5, 7,etc.). The Delay Start mode automatically
selects cooling at High Fan Speed. The temperature maintained will be
the same as previously set. To change the set temperature, press
"COOL " then Up or Down arrows until the desired temperature is
indicated on the display. After 5 seconds, the control will automatically
change the display back to the hours remaining until the unit will start/stop.
Turning the unit "ON" or "OFF" at any time will cancel the Delay Start/Stop
function.
Filter ” button and the light will go off.