FujiFilm FinePix E500 - Manual (Page 26)

51
Advanced
Features
3
1 Press “d” or “c” to select the frame (file) to be
erased.
2 Press the “MENU/OK” button to erase the
currently displayed frame (file).
To erase another frame (file), repeat steps 1 and 2.
When you have finished erasing frames (files),
press the “BACK (DISP)” button.
● ! Pressing the “MENU/OK” button repeatedly erases
consecutive frames (files). Take care not to erase a frame
(file) by mistake.
● ! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (
➡P.52).
FRAME
Pressing the “MENU/OK” button erases all the
frames (files).
ALL FRAMES
● ! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (
➡P.52).
If “ e ” or “ r ” appears, press the “MENU/OK”
button again to erase the frames (files).
◆
To stop the procedure midway
◆
Press the “BACK (DISP)” button to cancel erasing of
all the frames (files). Some unprotected frames (files)
will be left unerased.
● ! Even if you stop the procedure immediately, some frames
(files) will be erased.
0 1 0 2
50
1 Set the Mode switch to “w”.
2 Press the “MENU/OK” button to display the
menu on the LCD monitor.
2 Press “d” or “c” to select “o” ERASE.
ALL FRAMES
Erases all unprotected frames (files).
Back up important frames (files) onto your PC or
another media.
FRAME
Erases only the selected frame (file).
« BACK
Returns to playback without erasing any frames
(files).
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another
media.
3 1 Press “a” or “b” to select “ALL FRAMES” or
“FRAME”.
2 Press the “MENU/OK” button.
0 1 0 2
1
0 1
0 2
o ERASING SINGLE / ALL FRAMES
PLAYBACK MENU