Fostex VM200 - Manual (Page 132)

Effects
132 VM200 UserÕs Guide
Muting Effect Sends
You can mute Effect Send masters using the Master [ON] key. The
function of this key depends on the selected Fader mode. See “[ON]
Keys” on page 34 for more information.
1.
Press the [EFF1] or [EFF2] key in the Fader Mode section to
select Effect Send 1 or 2.
2. Press the Master [ON] key to turn the Effect Send on or off.
Monitoring Effects Sends
You can monitor the EFF send signal by connecting the MONITOR
OUT jacks to an amplifier and speakers. Set the Mon Sel (Monitor
Select) parameter on the
SETUP:SYSTEM 1: CLOCK/MON function page to
EFF1 or EFF2.
You can also monitor the EFF send signal through a pair of stereo
headphones connected to the PHONES jack. For more information,
see “Monitoring Signals” on page 97.
Controlling the Return Signals
This section explains how to set levels and pan effect return.
Setting the Effect Return Level
You can use the channels 17–20 faders to adjust the Effect return level.
1.
Press the [CHANNEL] key in the Fader Mode section.
2.
Press the [17–20 EFF RTN] Page Select key.
3.
Raise the channel fader to adjust the level.
You can view the effect return level on the CHANNEL EDIT/INPUT func-
tion page.
Panning Effects Returns
The Channels 17–20 panpots pan signals between the left and right
channels of the Stereo Buss Out and Rec Buss Out, and the odd and
even AUX buss outs. See “Panning Input Channels” on page 65 for
more information.
effect return level