Meridian Audio 568 - Manual

Meridian Audio Limited, Stonehill, Stukeley Meadows, Huntingdon, Cambs PE29 6EX
Tel +44 1480 52144 Fax +44 1480 459934
http://www.meridian-audio.com/
RS232 Information
JMB v 1.5 – 09-01-2001
Meridian 568 RS232 Interface
The RS232 interface for the 568 can be operated from any terminal which operates at 9600 baud
with 1 start bit, 1 stop bit and no parity. Commands take the form of 2 ASCII characters, in some
cases followed by a signed argument (‘nn’ below). All characters are echoed by the processor. A
carriage return character will execute the command, and backspace is also implemented. When a
command is executed, the 568 will return 12 characters.
The following table lists the commands available and shows examples of the messages returned.
These always correspond to the display on the front panel.
Source Commands.
CD Select CD source. CD 65
RD Select Radio. Radio 65
LP Select LP. LP 65
TV Select TV. TV 65
T1 Select Tape 1. Tape1 65
T2 Select Tape 2. Tape2 65
CR Select CDR. CDR 65
CB Select Cable. Cable 65
DV Select DVD. DVD 65
V1 Select VCR 1. VCR1 65
V2 Select CDR. VCR2 65
LD Select Laser Disc. Ldisc 65
Volume Commands.
VP Volume +. Trifield 66
VM Volume -. Trifield 64
VNnn Goto volume (1-99). Trifield 87
MU Mute. Mute
General Commands.
SB Standby. Standby
MR Menu Right Centre +OdB
ML Menu Left Balance <O>
MP Menu Plus (Up) Balance <1
MM Menu Minus (Down) Balance 1>
PNnn Go to preset
1
Trifield 65