Frymaster FOOTPRINT RE80 - Manual (Page 42)

2-13
2.4.1 Drain Valve Assemblies (cont.)
ITEM PART# COMPONENT
Drain Valve (units equipped with filtration)
1 810-2783 Valve, 1 ½” Full Port
2 816-0544PK O-ring (pack of 5)
3 807-2103 Microswitch, Straight Lever, Drain Safety Switch
4 106-3745 Bracket, Drain Safety Switch
5 200-5694 Cover, Drain Safety Switch
6 210-7077 Handle (multi-vat unit)
* 230-7413 Handle (single unit)
7 816-0405 Sleeve, Drain Handle, Red
8 809-0349 Spacer, 4.0 mm x 6.0 mm
9 809-0237 Nut, 4-40 Keps Hex (with extended teeth)
10 809-0988 Washer, 1" x .525" ID, Teflon
11 200-6116 Strap, Drain Valve Connecting, 1 ½” (single unit)
Drain Valve (units NOT equipped with filtration)
12 810-2126 Valve, 1 ¼” Full Port
13 807-2103 Microswitch, Straight Lever, Drain Safety Switch
14 106-9017 Bracket, Drain Safety Switch
15 901-2348 Cover, Drain Safety Switch
16 809-0349 Spacer, 4.0 mm x 6.0 mm
17 809-0237 Nut, 4-40 Keps Hex (with extended teeth)
Drain Valve (K3000)
18 810-2783 Valve, 1 ½” Full Port
19 816-0544PK O-ring (pack of 5)
20 807-2103 Microswitch, Straight Lever, Drain Safety Switch
21 807-4936 Microswitch, Gold Plated, Sealed
22 823-7749 Handle
23
809-0237 Nut, 4-40 Keps Hex (with extended teeth)
24 200-6116 Strap, Drain Valve Connecting, 1 ½” (single unit)
25 108-2006 Stud Assembly
26 816-0220 Insulation, Drain Safety Switch
Drain Safety Harness
* 106-9924 Standard, K3000
* 108-0250 KFC
* 807-5123 K3000
* 106-7718 Wire Assembly, Jumper (for units with no float switch or drain switch)
* Not illustrated.