Fostex MR-8CD - Manual (Page 106)

106
MR-8HD/CD Owner’s Manual (Track editing)
9) Press the [MENU/ENTER] knob.
The display now returns to the track edit menu
screen, where “
Copy-Paste Trk ” is highlighted.
10) Press the [STOP] key to exit the menu mode.
<Note>: If a destination track has recorded
data, pasting the copied data overwrites the
previous data.
<Note>: If you want to cancel the copy/paste
operation, move the cursor to " [CANCEL] " on
the screen, and press the [ MENU/ENTER ]
knob.
<Note>: If you are not satisfied with the re-
sult, press the [ UNDO/REDO ] key to undo the
operation (see page 103).
5) Rotate the [MENU/ENTER] knob to select
"Source Track = *", and press the [MENU/ENTER]
knob.
You can now select the desired copy source
track(s) by rotating the [
MENU/ENTER ] knob.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
7) Rotate the [MENU/ENTER] knob to select the
destination track(s), and press the [MENU/ENTER]
knob.
“ Dest. Track = * ” is now highlighted on the screen.
<Note>: You cannot select the same track(s)
for the copy source and destination.
8) Rotate the [MENU/ENTER] knob to move the
cursor to "ENTER" at the bottom of the screen,
then press the [MENU/ENTER] knob.
The display shows " Please Wait ", immediately
followed by " Completed " when the MR-8HD/
CD completes the copy/paste operation.
You can select the same number of tracks as
the copy source track(s). For example, if you
select a mono track for the source, you can
only select a mono track for the destination.
6) Rotate the [MENU/ENTER] knob to select the
source track(s) to be copied, and press the
[MENU/ENTER] knob.
You can now select the desired copy
destination track(s)
Flashing
Flashing
Flashing
Flashing