Frymaster FOOTPRINT E4 - Manual (Page 46)

2-5
2.3.1 Back Panels, Control Panel Frames, Doors, Sides, Tilt Housings & Top Caps
cont.
ITEM PART # COMPONENT
1 Back Panel, Upper (Panel for five station fryer shown)
220-0421 Single Station Fryer CRS (Use 230-0422 for Stainless Steel)
220-1973 Fryer ½ Station Fryer CRS
220-0419 Two Station Fryer CRS (Use 230-0420 for Stainless Steel)
220-0423 Three Station Fryer CRS (Use 230-0424 for Stainless Steel)
220-0425 Four Station Fryer CRS (Use 230-0546 for Stainless Steel)
220-0611 Five Station Fryer CRS (Use 230-0612 for Stainless Steel)
2 Back Panel, Center (Panel for five station fryer shown)
220-0501 Single Station Fryer CRS (Use 230-0502 for Stainless Steel)
220-1977 Fryer ½ Station Fryer CRS
220-0487 Two Station Fryer CRS (Use 230-0490 for Stainless Steel)
220-0491 Three Station Fryer CRS (Use 230-0492 for Stainless Steel)
220-0499 Four Station Fryer CRS (Use 230-0500 for Stainless Steel)
220-0616 Five Station Fryer CRS (Use 230-0617 for Stainless Steel)
3 Frame, Control Panel (Frame for five station fryer shown)
106-5016 Single Station Fryer
106-6846 Fryer ½ Station Fryer
106-5221 Two Station Fryer
106-5018 Three Station Fryer
106-5019 Four Station Fryer
106-5020 Five Station Fryer
4 Tilt Housing (Housing for five station fryer shown)
823-5494 Single Station
823-5999 Fryer ½ Station LH ½ fryer (use 823-5965 for RH ½ fryer)
823-5497 Two Station
823-5489 Three Station
823-5575 Four Station (use 106-7516 for Cracker Barrel)
823-5581 Five Station
5 Top Cap (Top cap for five station fryer shown)
106-5195 Single Station
(Also requires four 809-0079 1/4-20 Nutserts)
106-7060 Fryer ½ Station LH ½ fryer (use 106-6838 for RH ½ fryer) (Also requires four 809-
0079 1/4-20 Nutserts)
106-5196 Two Station (Also requires four 809-0079 1/4-20 Nutserts)
106-5197 Three Station (Also requires six 809-0079 1/4-20 Nutserts)
106-5198 Four Station (Also requires eight 809-0079 1/4-20 Nutserts)
106-5199 Five Station (Also requires ten 809-0079 1/4-20 Nutserts)
* Heat Shield
* 200-9614 Single Station
* 200-9610 Two Station (Two are used on Four Station) (One used on Five Station)
* 200-9611 Three Station (One used on Five Station)
6L 231-0323 Side, Standard Cabinet Left SS (use 221-0323SP for Enameled Steel)
231-1345 Side, Left Deep Cabinet SS
6R 232-0323 Side, Standard Cabinet Right SS (use 222-0323SP for Enameled Steel)
232-1345 Side, Right Deep Cabinet SS
7 810-1105 Magnet, Door
8 231-0352 Side, Filter Ready Cabinet Left SS (use 221-0352 for Cold Rolled Steel)
9 232-0352 Side, Filter Ready Cabinet Right SS (use 222-0352 for Cold Rolled Steel)
10 910-0889 Cover, 5-inch X 5-inch Access
11 910-0890 Cover, 5-inch X 7-inch Access
12 809-0359 Screw, #8 X ¼-inch Hex Washer Head
13 106-4397 Door, Left or Right (Left shown – move handle to opposite side for Right) - Standard
106-6899 Door, Left or Right – Fryer ½
14 809-0266 Screw, #10 X ½-inch Phillips Truss Head
15 210-9739 Handle, Eurolook Door (use 230-2088 for Fryer ½ handle)
* Not illustrated.
continued on the following page...