Futrex Body Fat and fitness Analyzer -5500A/WL User Manual
Page 33
33
F7 - Date Display
After entering the Function Mode:
a)
Press “7”
If “0” is displayed, the unit will display the date on the printout.
If “1” is displayed, unit will not display the date on the printout.
b)
To change, press “0” or “1”. Press ENTER to save the change.
c)
To Exit the Function Mode, turn the unit OFF.
F8 - Data Stream
This function allows the FUTREX-5500A/WL measured data to be sent to an external PC computer that is utilizing Futrex’s
Bodyometry™ software or other compatible software.
After entering the Function Mode:
a)
Press “8”
If “0” is displayed, no data is being sent.
If “1” is displayed, all measured data will be sent to the external computer.
b)
To change, press “0” or “1”. Press ENTER to save the change.
c)
To Exit the Function Mode, turn the unit OFF.