Fuji Bikes FEH381 - Manual (Page 13)

1
2. Models and Peripheral Equipment 1-3
O
ver
view
Peripheral Equipment
The following options are available for using the UG230 series more effectively.
UG00S-CWV3 (configuration software: English/Japanese)
Application software for editing display data for the POD.
(Windows98/NT4.0/Me/2000/XP compatible)
The UG230 series is supported with ver. 3.2.0.0 and later.
UG230A-DCL (option unit)
Optional unit to be used for D-sub 25-pin connector, CF card and Ethernet.
UG230P-D4 (FLASH memory cassette)
Extension print circuit board to extend the memory for screen data.
The capacity of FLASH memory is 4 Mbyte.
* Only when the UG230A-DCL (option unit) is provided
UG00P-TC (terminal converter)
Used for connection between the UG30 series and a PLC at the RS-422/485 terminal block.
* Only when the UG230A-DCL (option unit) is provided
UG00P-MR (card recorder)
The card recorder creates a backup copy of screen data or works as an external memory
storage system for memory manager and data logging functions.
UG00K-xx (memory card) compliant with JEIDA ver. 4.0
Used with the card recorder when having a backup copy of screen data or saving data on an
external medium for memory manager and data logging functions.
SRAM
256 K, 512 K, 1 M, 2 M, 4 Mbyte
FLASH ROM 256 K, 512 K, 1 Mbyte
UG00P-MS (memory card editor: English/Japanese)
Application software for editing data stored on a memory card, SRAM or CF card.
(Windows98/NT4.0/Me/2000/XP compatible)
TB1
SW1
CN1