FORD 2002 Mustang - Manual (Page 240)

meeting Ford specification EST-M2C118–A for
complete refill of Traction-Lok axles.
3 Ensure the correct automatic transmission fluid is
used. Transmission fluid requirements are indicated
on the dipstick or on the dipstick handle. MERCON
௡
and MERCON
௡ V are not interchangeable. DO NOT
mix MERCON
௡ and MERCON௡ V. Refer to your
scheduled maintenance guide to determine the
correct service interval.
4 Indicates only approximate dry-fill capacity. Some
applications may vary based on cooler size and if
equipped with an in-tank cooler. The amount of
transmission fluid and fluid level should be set by
the indication on the dipstick’s normal operating
range.
5 Service refill capacity is determined by filling the
transmission to the bottom of the filler hole with the
vehicle on a level surface.
LUBRICANT SPECIFICATIONS
Item Ford part
name Ford part
number Ford
specification
Brake fluid Motorcraft
High
Performance
DOT 3 Motor
Vehicle Brake
Fluid PM-1 ESA-M6C25-A
and DOT 3
Door
weatherstrips Silicone
Lubricant F7AZ-19G208-BA
and
F5AZ-19553-AA ESR-M13P4-A
Door latch,
hood latch,
auxiliary hood
latch, door
hinges, striker
plates, seat
tracks and fuel
filler door
hinge Multi-Purpose
Grease XG-4or
F5AZ-19G209-AA ESR-M1C159-A
Maintenance and Specifications
240