Fisher-Price NEW BEETLE L1114 - Manual (Page 12)

12
ASSEMBLY F
L1114pr-0920
• Fit a round bushing, barrel side first, into the hole in the inside of a
wheel (ribbed side).
• Repeat this procedure to insert a round bushing into the inside of
another wheel.
• Identify the inside and the outside of a wheel.
• The inside of the wheel has ribs on its surface. The outside of the
wheel has a smooth surface.
Smooth Surface 4
INSIDE
OF WHEEL
OUTSIDE
OF WHEEL
5
Round Bushing
Inside of
Wheel
Peg
Rear Axle
6
• Insert the rear axle into the hole in the outside (smooth side) of
the wheel.
• Be sure to align the rectangular bushing with the rectangular opening
in the outside of the wheel.
• Fit the peg on the inside of the hubcap into the small hole in the
outside of the wheel.
Outside of
Wheel
Small Hole
Ribs
• Fit a round bushing, barrel side first, into the hole in the rear wheel
well, as shown.
• Slide a 5 /
16
" large washer onto the rear axle assembly.
• Slide a spacer onto the rear axle assembly.
• Fit the rear axle assembly through the round bushing and into the
hole in the rear wheel well.
7
Round
Bushing Spacer
Large
Washer
Rear Axle
Assembly
Rear Wheel Well
Barrel Side Barrel Side
Barrel Side Barrel Side