FORD 2000 Crown Victoria - Manual (Page 201)

2 Ensure the correct automatic transmission fluid is used. MERCON
௡ and
MERCON
௡ V are not interchangeable. DO NOT MIX MERCON௡ and
MERCON
௡ V. Refer to the Scheduled Maintenance Guide to determine
the correct service interval.
3 Indicates only approximate dry-fill capacity. Some applications may
vary based on cooler size and if equipped with an in-tank cooler. The
amount of transmission fluid and fluid level should be set by the
indication on the dipstick’s normal operating range. Police Package refill
capacity-12.1L (12.8 quarts).
4 Use Ford Premium Engine Coolant (green in color). DO NOT USE Ford
Extended Life Engine Coolant (orange in color). Refer to Adding engine
coolant, in the Maintenance and Care chapter.
5 Rear axles are considered lubricated for life when the vehicle is used
for normal service. See your Scheduled Maintenance Guide for Severe
Duty requirements.
Traction-Lok axles use 1.6-1.8L (3.50-3.75 pints) of rear axle lubricant.
Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or
equivalent meeting Ford specification EST-M2C118–A for complete refill
of Traction-Lok rear axle.
Service refill capacities are determined by filling the rear axle 6 mm to
14 mm (1/4 inch to 9/16 inch) below the bottom of the filler hole.
LUBRICANT SPECIFICATIONS
Item Ford part
name Ford part
number Ford
specification
Brake fluid High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
1
C6AZ-19542-AB ESA-M6C25-A
and DOT 3
Door
weatherstrips Silicone
Lubricant F7AZ-19G208-BA
and
F5AZ-19553-AA ESR-M13P4-A
Engine coolant Ford Premium
Engine Coolant E2FZ-19549-AA
(in Canada,
Motorcraft
CXC-8-B) ESE-M97B44-A
Capacities and specifications
201