FORD 2000 Excursion - Manual (Page 70)

Unlocking the doors with the keyless entry system
To unlock the driver’s door, enter either the factory-set code or personal
code (each digit pressed within five seconds of the prior digit). The
interior lamps will illuminate.
To unlock all doors, enter the
factory-set code or personal code
(driver door unlocks) and press the
3/4 control within five seconds.
Locking the doors with the keyless entry system
It is not necessary to first enter the
factory or personal code prior to
locking all doors. To lock all the
doors:
• Press the 7/8 and the 9/0 control
at the same time.
SECURILOCK
ி PASSIVE ANTI-THEFT SYSTEM
The SecuriLock
௢ passive anti-theft system provides an advanced level of
vehicle theft protection. Your vehicle’s engine can only be started with
the two special SecuriLock
௢ electronically coded keys provided with
your vehicle. Each time you start your vehicle, the SecuriLock
௢ key is
read by the SecuriLock
௢ passive anti-theft system. If the SecuriLock௢
key identification code matches the code stored in the SecuriLock
௢
anti-theft system, the vehicle’s engine is allowed to start. If the
SecuriLock
௢ key identification code does not match the code stored in
the system or if a SecuriLock
௢ key is not detected (vehicle theft
situation), the vehicle’s engine will not operate.
If there is any potential SecuriLock
௢ anti-theft problem with your
vehicle, ensure ALL SecuriLock
௢ keys for that vehicle are brought to
the dealership, to aid in troubleshooting.
The SecuriLock
௢ passive anti-theft system is not compatible with
aftermarket remote start systems. Use of these systems may result in
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
Controls and features
70