Farallon Communications NetLine USB 10/100 User Manual
Page 12
Advertising
12 Chapter 3
LED Blinking:
The indicator blinks
green when data is received on the
100Mbps network and blinks yellow
when data is received on the
100Mbps network.
LED Off:
If the LED is off, and you have
a network cable connected to the
adapter, it may indicate one of the
following:
■
The network cable is not properly
connected or is faulty.
■
No 10Base-T or 100Base-TX
device is connected at the other
end of the network cable.
■
The network cable exceeds 100
meters.
■
The device is not receiving power
from a USB por t or there is no
USB suppor t on your system.
■
You are using a straight-through
10Base-T or 100Base-TX cable to
connect directly to another work-
station.
■
You are using a cross-over cable
to connect to a hub.
Advertising