Fisher-Price BARBIE 78477 - Manual (Page 13)

20
30
40
60 70
80
90
100
110
120 0
10
50
MPH
0
1
2 3 4
5
6
RPM x 1000
E F
TEMP 100 210 260
®
LO KC HI
REV FWD
TREB
IGNITION
6
9
Steering Wheel
Cap Nut
Steering
Column
“UP”
Tab
• Turn the vehicle body upright.
• Position the steering wheel so that the spokes form a
“Y” as shown. The tab on the steering wheel stem
should face up.
• Fit the steering wheel onto the steering column.
• Fit a cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the
steering column.
Helpful Hint! You may want the help of another person to
support the steering column while you tap the cap nut with
the hammer.
Assembly
7
8 5
• Wipe the steering column with a paper towel to remove
any excess lubricant.
• Turn the vehicle body on its side.
• Insert the straight end of the steering column up through
the two holes in the vehicle body and out through the
hole in the dash. 13
Microphone
Dash
• Insert the end of the microphone cord though the hole
under the dash and into the hood area.
• Place the microphone in the dash pocket.
Steering
Column
Hole
Bottom View
• Insert the end of the steering column through the hole in
the steering rod.
• Fit a cap nut onto the end of the steering column.
• While supporting the steering column, tap the cap nut
with a hammer to secure it on the steering column.
Helpful Hint! You may want the help of another person to
support the steering column while you tap the cap nut with
the hammer.
Steering Rod
Cap Nut
End of Steering Column
Bottom View
• Apply labels to the dash as indicated in the illustration.
8
10
11
15
22
18 20
17
21