Fisher-Price NEW BEETLE 73517 - Manual (Page 20)

Assembly
• Carefully turn the vehicle body on its side, so that the bottom
faces you.
• Position the bracket behind the steering linkage, as shown.
• Slide the bracket onto the end of the steering column. Push
the bracket over the steering column’s second bend.
37
• Fit the end of the steering column through the hole in the
steering linkage .
• Turn the bracket and fit it into place . B
A
38
Bracket
Steering
Column
2nd Bend
Steering
Linkage
20
Steering
Bracket
Steering
Column
Steering
Linkage
35
• Fit a .354 black cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the
steering column.
Hints:
- You may need the help of another adult to keep these two
parts in the correct position.
- You may want to position the steering column on a scrap
block of wood to protect the assembly surface.
36
• With the large opening in the steering wheel upright, fit the
curved end of the steering column down into the large hole
in the windshield.
• Continue to insert the curved end of the steering column
through the small, rectangular opening in the floor of
the vehicle body.
Steering
Column
Black
Cap Nut
Curved End
of Steering
Column
Large
Opening
Upright
Small
Rectangular
Opening
Windshield
Large Hole
Bottom View
Bottom View
A
B