Top panel, Record track select keys [record track (1 - 8), Letters in brackets ([ ]) are labels on the panel – Fostex VR800 User Manual
Page 8
8
VR800 Owner’s Manual (Names and Functions)
2. Access LED [ACCESS]
This LED light up or flashes when data is being written to or
read from an external SCSI current drive disk, or 3.5-inch
internal E-IDE hard disk.
Note:
Do not turn off the power to the VR800 when this
LED lights up or flashes. Otherwise you may lose data on
the hard disk connected to the VR800.
1. Record track select keys [RECORD TRACK (1 - 8)]
These keys enable you to select SAFE or READY for a
recording track. Pressing the key once will cause the
corresponding track to enter the READY mode, and the lamp
of the key you pressed to flash. Pressing the key again will
cause the corresponding track to enter the SAFE mode, and
the lamp to turn off. When you start recording on a track
in READY mode, the flashing lamp remain lit.
If you press only the RECORD button with a track in READY
mode, you can monitor the signal input to the READY track
so that you can adjust the recording level. To cancel this
input monitoring status, press the RECORD button again.
This puts the VR800 in playback monitoring mode.
You can also use these select keys to select tracks to Copy &
Paste, Move & Paste, Erase and other editing features, as
well as to execute the digital scrubbing.
Note:
You can record on real tracks 1–8 in real-time, but
not on additional tracks 9–24. If you are using an MO drive
as the current drive, you can record only two tracks
simultaneously. If you try to record more than two tracks by
setting them to READY mode, [Track Over !] appears and
READY mode will cancel.
Refer to page 24 for more information on playback monitoring
and input monitoring.
3.LCD
The LCD indicates signal levels and various settings.
Refer to “Display Section” on page 16 for more information
on the display.
Top Panel
Letters in brackets ([ ]) are labels on the panel.
SHIFT
P.EDIT
LOC MEM
RECORD
STOP
PLAY
REW
F FWD
AUTO PUNCH
CLIPBOARD
AUTO RTN
OUT
IN
END
OUT
IN
START
EJECT
ACCESS
5
6
7
8
OL
24
12
6
0
1
2
3
4
RECORD TRACK
4
3
2
1
5
6
7
8
EXECUTE
/ YES
EXIT
/ NO
DISP SEL
UNDO / REDO
EDIT
HOLD/
STORE
SETUP
JOG
VARI PITCH
SCRUB
LOCATE
AUTO PLAY
PGM SEL
AUTO RTN
TIME BASE SEL
SHUTTLE
LOCATE REC END
LOCATE ABS 0
CLIPBOARD PLAY
PUNCH
AUTO
OPTICAL
A SYNC
PREVIEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30