Freecom Technologies RCS-S5000B - Manual (Page 10)

INSTALLATION (contd.)
Wall-Mounting (contd.)
CAUTION: Always wear eye protection (safety goggles) when drilling.
5. Using a drill bit (masonry drill bit for concrete), drill mounting hole locations. Mount
brackets to exterior wall with supplied 1/4" anchors(4) and 1/4" screws (4).
6. Check that brackets are secure on wall.
7. Use handle to carefully lift outdoor unit onto
mounting brackets. The top tabs on the mounting
bracket will fit into the bottom metal brackets on
the back of the unit. The small plastic tabs on the
outdoor unit will fit into the rectangular slots on
the bottom of the bracket. Install set screws to
secure outdoor unit to top of bracket.
Check that outdoor unit is tightly secured
on brackets before releasing.
8. Hook and secure one end of support belt onto
round hole on mounting bracket on back of unit.
Secure other end of support belt to wall with the
appropriate hardware.
Disconnecting Tube Set
This air conditioner is equipped with convenient quick Connect Couplings which allow for
the removal and routing of the Tube Set through narrow windows or walls.
CAUTION: Removing and re-connecting the Tube Set should be performed only by a
qualified heating and air conditioning professional.
Instructions for the removal and re-connecting of the Tube Set are available to qualified
trade professionals by separate request to a Freecom Dealer.
IMPORTANT NOTICE: High pressure refrigerant gas and lubricants are present in
the Tube Set. Improper removal of the Quick Connect Couplings could result in
personal injury from exposure to high-pressure refrigerant materials. Improper
connection of the Tube Set could result in refrigerant leaks. Leaking or loss of
refrigerant materials will result in poor cooling performance and eventual damage
to the motor compressor.
CAUTION: Leaking refrigerant exposed to an open flame or other heat source
may produce toxic fumes.
10