Installing the projector against the screen, Mounting the projector, Installing the projector – Meridian Audio FDP-DILA3 User Manual
Page 15
1
5
Installing the Projector against the Screen
Installing the Projector
The projector should be placed so that the center line of the lens is at a right angle to the screen as in the following figures.
Ⅵ Side View
Ⅵ Top View
●
Trapezoidal-distortion can be corrected using the KEYSTONE
button on the projector. (
☞
page 30)
Up to approximately 30˚ upward
and downward from the horizon-
tal line.
Up to approximately 10˚ upward and
downward from the vertical line.
Mounting the Projector
When mounting of the projector is required, do it using the embedded three screw holes (M6 nuts) at the bottom of the projector.
Precaution for ceiling-mount
• To ceiling-mount and adjust the projector, special exper-
tise and techniques are necessary. Be sure to ask your
dealer or specialist to perform the work.
• Do not mount on places that will be subjected to knocks
and vibrations.
• As the depth of the screw holes is 10mm, use screws
shorter than 10mm but longer than 6mm. Otherwise, the
screws will damage the internal parts of the projector
causing malfunction.
NOTE: THE ANAMORPHIC LENS ADDS
8% OF DISTANCE DROP (WITH CEILING
MOUNT)
NOTE: FOR THE BEST IMAGE, DO NOT
USE KEYSTONE CORRECTION