All freezer (17 cu. ft.), Professional, All freezer – FRIGIDAIRE FPUH17D7KF User Manual

Page 2: With optional ice maker

Advertising
background image

All-Freezer Specifications

Product Shipping Weight (approx.) – 229 Lbs.

An electrical supply with grounded three-prong receptacle is

required. The power supply circuit must be installed in accordance

with current edition of

National Electrical Code (NFPA 70) and

local codes & ordinances.

Voltage Rating – 115V / 60 Hz / 15 or 20 Amps

Amps @ 115 Volts = 5 Amps

Always consult local and national electric & plumbing codes.

Minimum opening of 66" H x 33" W x 25-1/4" D required for single-unit

“Built-In Look” installation; 66" W required for double-unit installation.

(66" H to be measured from finished floor to underside of soffit or

overhead cabinet.)

Minimum 25-1/4" depth requires recessed electrical outlet and

copper water line.

Remove all wall / floor molding prior to built-in installation.

When installing refrigerator adjacent to wall, cabinet or other

appliance that extends beyond front edge of unit, 20" minimum

clearance recommended to allow for optimum 140° door swing,

providing complete crisper access and removal. (Absolute 4"

minimum clearance will ONLY allow for 90° door swing which

will provide limited crisper access with restricted removal.)

Optional Ice Maker Kit (PN # IM501) available for installation.

Water line for ice maker can enter opening through floor or rear wall.

Copper tubing recommended between cold water line and water

connection location. Water line tubing recommended is 48" minimum

length by 1/4" diameter. Installation of easily accessible shutoff valve

in water line required.

To allow for ease of moving out side-by-side units after installation,

84" minimum length of coiled copper tubing recommended.

Freezer must be placed on level surface of hard material, same height

as flooring. Surface must support approximately 800 lbs. when fully

loaded. Unit equipped with 4-point leveling.

If optional Single or Double Trim Kit is to be used, different cutout

dimensions are required. (Refer to cutout dimensions on this page

and to Trim Kits Installation Specifications page on web.)

Note: For planning purposes only. Refer to Product Installation Guide

on the web at frigidaire.com for detailed instructions.

Optional Accessories

Single Trim Kit – (PN # ALLFRZKIT).

Double Trim Kit – (PN # DUOTRIMKIT).

Ice Maker Kit – (PN # IM501).

All Freezer (17 Cu. Ft.)

with OPTIONAL ice maker

Professional

Specifications

subject to change.

Note: Optional Trim Kits available for Built-In

All Freezer. For specifications, refer to Trim Kits

Installation page on web.

All Freezer

FPUH17D7K F

17 Cu. Ft. Built-In

FRIGIDAIRE®

USA

250 Bobby Jones Expressway

Martinez, GA 30907

1-800-FRIGIDAIRE

frigidaire.com

CANADA

5855 Terry Fox Way

Mississauga, ON L5V 3E4

1-800-265-8352

frigidaire.ca

FPUH17D7K 05/09

© 2009 Electrolux Home Products, Inc.

Printed in the U.S.A.

Advertising
This manual is related to the following products: