FRIGIDAIRE 316495003 - Manual (Page 9)

9
Manual Operation
Setting the timer
Example: setting timer for 5 minutes:
1. Touch
timer pad once.
2. Enter desired time using number pads.
3. Touch
START/+30sec pad.
When the timer has reached the end of set time, you will
hear beep alerts indicating the timer has run out.
Using EasySet
Example: to quickly heat for 2 minutes at 100% power:
Touch
number pad for desired minute(s).The
microwave will start immeadiately.
Microwave heating or cooking may be quickly set at 100%
power level for 1, 2 or 3 minutes. Use the number keys 1, 2
or 3 to choose the desired minutes of cook time (this option
will only work using the 1, 2 or 3 numeric pads):
Note: the “EasySet” function cannot be set when using the
“weight defrost” feature.
Heating with high power level
Example: to heat for 5 minutes at 100% power:
1. Press
cook time pad.
2. Use the number pads to enter desired
heating time (cook time may be set up to
99 minutes and 99 seconds).
3. Touch
START/+30sec pad.
Heating with lower power levels
Example: to heat for 4 minutes at 70% power:
1. Press
cook time.
2. Use the number pads to enter desired
heating time (cook time may be set up to
99 minutes and 99 seconds).
3. Press
power level pad once for power
level 10 (100% power).
4. Use the number keys to change the power
level to 7. PL7 appears in the display (70
% power).
5. Press
START/+30sec pad.
When heating has finished you will hear 5 beeps and the
time of day will display.
Using the highest power level to heat foods with does not
always give the best results when some types of food need
slower cooking, such as roasts, baked goods or custards.
Your oven has nine other power levels you may choose.
When heating has finished you will hear 5 beeps and the
time of day will display.
Control Lock
You may lock the control panel to prevent the microwave
from being accidentally started or used by children.
The control lock feature is very useful when cleaning the
control panel. The lock will prevent accidental programming
when wiping the control panel clean.
Example: to set the control lock ON:
Touch and hold the
STOP/cancel pad for more
than 3 seconds. The Lock icon will appear in the
display and will sound with 1 beep.
hold for 3
seconds
Example: to change the control lock from ON to OFF:
Touch and hold the
STOP/cancel pad for more
than 3 seconds. The Lock icon will disappear
from the display and will sound with 1 beep.
hold for 3
seconds