Door ajar speed cont – FORD 2000 Ranger User Manual

Page 12

Advertising
background image

Check gage (if equipped)

Illuminates when the engine coolant
temperature is high, the engine oil
pressure is low or the fuel gauge is
at or near empty. The ignition must
be in the ON position for this lamp to illuminate. The lamp will also
illuminate when the ignition is turned to the ON position. Refer to
Engine coolant temperature gauge, Engine oil pressure gauge or
Fuel gauge in this chapter for more information.

Four wheel drive low (if equipped)

Momentarily illuminates when the
ignition is turned to the START
position. Illuminates when
four-wheel drive low is engaged. If
the light continues to flash have the system serviced.

Four wheel drive high (if equipped)

Momentarily illuminates when the
ignition is turned to the START
position. Illuminates when four-
wheel drive high is engaged. If the
light continues to flash have the system serviced.

Door ajar

Illuminates when the ignition is in
the ON or START position and any
door is open.

Speed control

This light comes on when either the
SET/ACCEL or RESUME controls
are pressed. It turns off when the
speed control OFF control is
pressed, the brake is applied or the ignition is turned to the OFF
position.

CHECK

GAGE

4WD

LOW

4WD
HIGH

DOOR

AJAR

SPEED

CONT

Instrumentation

12

Advertising