FORD 1998 Contour - Manual (Page 92)

Driving
92
The console-mounted gearshift will
lock when you turn the key to the
lock position. When the gearshift is
in any position except P (Park),
the ignition key cannot be turned
to lock or removed from the
steering column. To remove the
key, the gearshift lever must be in
P (Park).
Once the gearshift is secure in the
desired position, release the brake
pedal and use the accelerator as
necessary.
Driving
Never leave a vehicle
unattended while it is
running.
• P (Park)
Always come to a complete stop
before shifting into P (Park). This
locks the transaxle and prevents
the front wheels from rotating.
• R (Reverse)
The vehicle only moves backward.
Always come to a complete stop
before shifting in or out of R
(Reverse).
P = Park . . . . . . . . . . . . . .
R = Reverse . . . . . . . . . . .
N = Neutral. . . . . . . . . . . .
D = Drive: Gear 1 to 4
with overdrive . . . . . .
Gear 1 to 3
with overdrive
cancelled . . . . . . . . . .
2 = Gear 2 . . . . . . . . . . . .
1 = Gear 1 . . . . . . . . . . . .
CDW IVB1-10Driving en C 5/15/97 8:52 PM Page 92