FUJITSU M3097G User Manual
Page 87
(k) Vender unique parameter: byte 28 and after
Specifies, in byte 28 and after, a vender unique identification parameter,
including items such as outline, emphasis, and automatic separation, as
required. This parameter is specified in the following format. This
parameter does not need data until byte 3E. (It is unnecessary to transfer
the unnecessary parameter but the intermediate parameter cannot be
omitted.)
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
Vender unique identification code
d Pattern number
Outline extraction
Image emphasis
Automatic separation
Reserved
DTC selection
Reserved
Variance rate
f
Vender unique identification code: byte 28
Specifies a vender unique identification code. For this scanner, X©00π
must be specified. If other value is specified, this scanner returns the
following error information:
f
Status:
00001 (CHECK CONDITION)
f
Sense key: X©5π (ILLEGAL REQUEST)
f
d pattern: byte 29
Specifies d pattern number for subwindow. For details, see the
explanation of the SET WINDOW command.
f
Outline extraction: byte 2A
Specifies the outlining for the subwindow. For details, see the
explanation of the SET WINDOW command.
4 $ 62