Driver controls, Cruise – FORD 2002 F-150 User Manual

Page 88

Advertising
background image

• Depress the clutch pedal (if

equipped).

Disengaging the speed control will
not erase the previously
programmed set speed.

Pressing OFF will erase the
previously programmed set speed.

To return to a previously set speed
• Press RES. For RES to operate,

the vehicle speed must be faster
than 48 km/h (30 mph).

Indicator light

This light comes on when either the
SET ACCEL or RES controls are
pressed. The vehicle speed must be
at or above 48 km/h (30 mph). It turns off when the speed control OFF
control is pressed, the brake or clutch is applied, or the ignition is turned
to the OFF position.

ON

OFF

RES

SET

ACCEL

COAST

CRUISE

Driver Controls

88

Advertising
This manual is related to the following products: