Yamaha CD-S300 - Manual (Page 8)

4
En
CONTROLS AND FUNCTIONS
■ Installing batteries in the remote control
1
Press the part and slide the battery
compartment cover off.
2
Insert the two supplied batteries (AA, R6,
UM-3) according to the polarity markings (+
and –) on the inside of the battery
compartment.
3
Slide the cover back until it snaps into place.
■ Using the remote control
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the front panel of this unit during
operation.
1 Infrared signal transmitter
Sends infrared signals to this unit.
2 CD/USB
Switches between CD mode and iPod/USB mode (see
page 6).
y
This setting is retained even if you turn off this unit.
3 PROGRAM
Turns on or off the program playback mode. See
“Program playback” on the next page.
4 DIMMER
Each time you press DIMMER, the brightness level
changes by 4 levels.
y
This setting is retained even if you turn off this unit.
5 Numeric buttons
Use to select directly a track on the disc or a file in the
current folder.
6 (Search backward), (Search
forward)
Searches tracks backward/forward while the key is
pressed.
7 (Skip backward), (Skip forward)
: Skips to the next track.
: Skips back to the beginning of the current track.
(twice): Skips to the previous track.
Remote control
Within 6 m
(20 ft)