Yamaha Soavo-1 - Manual (Page 5)

4 En
Eng
lish
<Bi-wired connections>
Before connecting the speaker cable, you must remove the jumper cable.
Red (+)
Black (–)
Woofer terminals
Soavo-1 (R) Soavo-1 (L)
Amplifier
Jumper
cable
Amplifier
Soavo-1 (R) Soavo-1 (L)
Tweeter/Mid-range
terminals
Both SPEAKERS A and
B should be connected.
When your amplifier has two sets
of speaker output terminals. When your amplifier has only one
set of speaker output terminals. To connect the speaker to the
output terminals of the
amplifier, two pairs of cables for
each of the woofer and the
tweeter are used instead of
standard connections. This
type of connection decreases
the modulation distortion
caused by electric resistance of
the cables and driving current
of the speakers. Consequently,
purer sound quality can be
expected.
Before connecting the speaker cable,
you must remove the jumper cable.
When using a banana plug
1 Unscrew the terminal knob.
2 Remove the cover by pulling it toward you.
3 Tighten the terminal knob.
4 Simply insert the banana plug into the terminal.
2
1
3
4
Banana plug