FRIGIDAIRE 154575701 - Manual (Page 6)

6
Heat Dry
OPERATING INSTRUCTIONS
Delay Start
The DELAY START option allows you to automatically delay
starting your dishwasher from 1-24 hours.
On models with 1-24 hour delay, press the DELAY START
pad until the desired delay time shows in the STATUS
window. A light will come on indicating the delay start hours
and will remain on until cycle starts.
To cancel the DELAY START option and begin the cycle
before the delay period is over, press the START/CANCEL
pad.
The HEAT DRY option in combination with rinse aid will
enhance drying performance. The energy required to use
the HEAT DRY option costs pennies per cycle. You may
choose not to select the HEAT DRY option; however you will
have items in your dish load that will not be completely dry
at the end of the cycle.
You may see water vapor coming from the vent during the
drying portion of cycle. The drying option may be changed
at any time during the cycle and affects only the drying
period.
Opening the door longer than one minute during the dry
cycle cancels the selected dry program.
When HI-TEMP WASH option is selected, the dishwasher
heats water in the main wash to approximately 140 o F
(60 o C).
This increase in water temperature helps dishwasher
detergent remove food greast and soil from dishes more
effectively and aids in drying. HI-TEMP WASH option can
be used with all cycles except CHINA CRYSTAL (some
models) and RINSE & HOLD. HI-TEMP WASH is
automatically provided when POTS & PANS cycle is
selected.
When HI-TEMP WASH option is selected, the light above
the pad will come on and remain on until end of cycle.
To turn off the HI-TEMP WASH option, press the pad a
second time. The light above the pad will turn off.
Hi-Temp Wash
To Cancel a Cycle
You can cancel a cycle anytime during the cycle. Press
START/CANCEL pad and the dishwasher will start a 60
second drain. At the end of the drain, select the desired
cycle.
Child Lock Controls
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock the
dishwasher controls by pressing and releasing the or the
NO HEAT DRY pad for 3 seconds while the door is latched.
An indicator light on the lock graphic pad will illuminate
when the controls are locked and no new selections can be
made until the lock is released. To unlock the contrls, press
the NO HEAT DRY pad until the indicator light goes out.