FEIN Power Tools GRIT Belt Grinder - Manual (Page 11)

GXW
7 901 04 GXC
7 901 03 GX 75 /
GX 75 2H
1.
2.
3.
11
Quality surface finishes are always assured with the GXC.
Included are two nylon and one brass guide rail for all your
finishing needs. The brass rail is used for wet or dry finishing
on rough surfaces such as corrosion, scale, etc. The nylon rail
is used for wet finishing on sensitive materials when a highly
polished surface is required.
Perfect surface quality and high process speeds on pipes
and shafts are no problem for the GXC cylindrical grinding
module. Even commercially available fleece belts can be
used in connection with the GX 2H basic unit. The feed rate
can be adjusted for various materials through an infinite range
up to 6.6 ft/min (2 m/min).
There are several arguments for wet grinding using the GXW
cooling lubricant module: A liquid coolant captures the metal
dust, which increases the service life of the sanding belts; the
finishing results are noticeably improved; and thanks to the
reduction of heat generated during grinding the corrosion risk
for stainless steel pipes is reduced. A self contained, closed
circulation system minimizes coolant consumption.
Belt grinder
(basic units) Cooling
lubricant
module
Cylindrical
grinding
module
Cylindrical grinding machine
“Centerless”
Quick brilliant results all around
Always on the right track
GXW for wet grinding