Meridian Audio Stereo System - Manual (Page 45)

�������������������
мо пс утф Assign öõú
Current source DSP parameter Value
D i g i t a l
s u r r o u n d
p r o c e s s i n g
4 0
Menu < / >
To select the parameter you want to
change
• Press < or >, or Function < or > on
the MSR+, until the display shows the
name of the parameter you want to
change.
For example:
������������
Menu V / A
To change the value of the parameter
• Press A or V, or Function A or V on
the MSR+, to change the value of the
parameter.
As you change the value you will be able
to hear the effect on the sound, and the
display will show the current value. For
example:
������������
After a short delay the display will revert
to the normal display of DSP preset and
volume.
Assign
To assign a DSP preset to a source
• Listen to the source you want to change.
For example, to change the DSP preset
used for multichannel movie sources, play
a DVD-Video.
The display will show the DSP preset
assigned to that source. For example:
������������
• Press DSP until the display shows the
new DSP preset you want to assign. For
example:
���������
• Press More until you see Assign.
• Press Assign to save the new
assignment.
More Changing DSP parameters
Each DSP preset provides a series of parameters that you can vary
to customise the behaviour of the preset to your specific
requirements. For example, most presets provide Balance and
Depth to allow you to alter the imaging of the sound field.
For each of the built-in DSP presets these parameters are set to
standard values, designed to give the best sound in typical listening
conditions and with most source materials. Each time you select
a different DSP preset the parameters are reset to these standard
values, even if you have previously altered them. You can also
change the DSP preset assigned to a source.
• Press More to display the menu keys.
On the G91 press More to display the Assign soft key. You cannot
change the DSP parameters.