FUJITSU XG0448 - Manual (Page 24)

XG0448 Hardware Guide Chapter 1 Getting Started
Options 24
1.2 Options
1.2.1 SFP Modules
SFP modules (100BASE-FX/1000BASE-SX/1000BASE-LX/1000BASE-ZX/1000BASE-BX-D/1000BASE-BX-U) can
be used.
Precautions
• Turn the switch power off to install a SFP module.
• SFP modules can not be installed in the optional SFP+ extension card.
• 1000BASE-BX-D and 1000BASE-BX-U SFP modules must be used in pairs
• RJ45 ports 45 through 48 are 'combination' ports that are associated with the four SFP ports. Their use is mutually
exclusive. If the RJ45 port 45 is cabled then the associated SFP slot cannot be used.
1.2.2 SFP+ Modules
SFP+ modules (10GBASE-SR/10GBASE-LR) are intended for use in the optional extension card.
Precautions
• Turn the switch power off to install a SFP+ module.
• SFP+ modules can not be installed in an SFP slot.
Reference
"2.3.3 Connecting Twisted Pair Cable / SFP Module" (pg.37)
User’s Guide " SFP Module" (pg.25)
Reference
"2.3.4 Connecting Twisted Pair Cable / SFP+ Module / CX4 Cable" (pg.39)
User’s Guide " SFP+ Module" (pg.26)