Foxconn Interfacility Link 7870 - Manual (Page 39)

7870 Interfacility Link Installation and User’s Guide page 31
Foxcom proprietary information
Appendix 2 Installing a Standalone Unit
To install the 7870T-STD or 7870R--STD Standalone:
1. Place the
7870
unit on the standalone flange, matching the holes.
2. Using four screws (#4 or #6) secure the unit and the flange to the wall.
3. Apply AC power to the standalone power supply unit.
4. Connect the
7870
unit to the power supply. The Laser LED should be lit.
All remaining steps are the same as in the product manual. See sections
2.1 Setting up the Transmitter
on page8 and
2.3 Setting Up the Receiver
on page10.