Air conditioner features, Key features, Operation of current device – FRIGIDAIRE 220202D019 User Manual

Page 5: Unit control, On some model)

Advertising
background image

5

Air Conditioner Features

UNIT CONTROL

Key Features

(On some model)

LIGHT

ON/OFF

REMOTE CONTROL

ACTIVATES
TIMER

FAN
SPEEDS

SETS
MODES

ADJUSTS
TEMP &
TIMES

DISPLAYS
TEMPERATURE/TIME
FAN SPEED

ADJUSTS
TEMPERATURE
OR TIME

ACTIVATES
TIMER

CHECK FILTER
RESET BUTTON

SETS MODE

TURNS UNIT
ON OR OFF

AUTO COOL FEATURE

SLEEP MODE

SETS FAN SPEEDS

Multi-Step Fan and Cooling Speeds:

90 distinct fan settings give the ultimate in airflow and noise control.

Low Voltage Compensation:

Ensures aganist evaporator freeze-ups at low supply voltage conditions.

Operation of Current
Device

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT

SAFETY INSTRUCTIONS before operating this appliance.

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and
all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the
unit control alone or with the remote.

The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will

notice a click as the RESET button pops out.

3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indi-

cated by a light on the plug head).

NOTES:

Do not use this device to turn the unit on or off.

Always make sure the RESET button is pushed in for correct operation.

The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or
it cannot be reset. A new one can be obtained from the product manufacturer.

If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained from
the product manufacturer.

SZ000400(En)-Yaokong

12/10/2004, 5:36 PM

5

Advertising