Care and cleaning – Kenwood CM450 series User Manual

Page 6

Advertising
background image

5 For each cup of coffee required,

place one level spoon of filter coffee
into the permanent filter. Adjust
quantity to taste.

6 Close the lid.
7 Plug into the power supply.

CM450/CM460 series

Press the ON/OFF button, the light
will come on and brewing will
commence.
CM550 and CM560 series

Press the Auto/ON/OFF button
twice for coffee to be produced
straight away, the light will come on
and brewing will commence. If you
want to use the automatic brew
facility follow the instructions to set
the clock and to programme
automatic brew.

8 To dispense coffee, press the coffee

dispensing lever with a cup and
coffee will flow out. Never press the
dispensing lever with your hand. To
stop the flow remove the cup.
Coffee may be dispensed during and
after brewing.

To preserve heat and flavour, DO
NOT open the lid during or just after
brewing.

9 The BrewMaster will keep the coffee

warm and then automatically switch
off after 2 hours. To manually switch
off earlier, press the ON/OFF button.

CM550 and CM560
series only

to set the clock.

1 Plug in the BrewMaster. The

numbers on the clock will flash until
the time of day is set or one minute
elapses.

2 To set the time of day:

Press the ‘H’ button to set the
current hour with AM or PM.

Press the ‘M’ button until you reach
the current time.

to select 12 or 24 hour
clock.

To change from a 12 hour clock
(AM/PM) to a 24 hour clock or vice
versa. Press the H and M buttons
simultaneously for 2 seconds.

to programme automatic brew

1 Set the clock to the correct time of

day.

2 Press the ‘Prog’ button and the

digits will flash.

3 Press the H and M buttons until the

desired brewing time is reached.

4 Press the ‘Prog’ button to confirm

setting. The digits will stop flashing
and return to the set time of day.

5 Push the Auto/ON/OFF button once

and ‘PRO’ will show in the display
indicating that the brew cycle will
begin at the set time. The light will
flash on and off.
Note: if the Auto/ON/OFF button is
pushed twice, brewing will begin
immediately.

To check the programmed time,
press the ‘Prog’ button and the
programmed time will flash. Press
‘Prog’ button again to return back to
the clock.

care and cleaning

Always switch off, unplug and allow
to cool before cleaning.

Never put the machine in water or let
the cord or plug get wet.

Don’t wash parts in the dishwasher,
except the filter holder and coffee
tank.

coffee tank, drip tray, filter

holder and permanent filter

Wash, then dry thoroughly.
body

Wipe with a damp cloth, then dry.
Don’t use abrasives – they’ll scratch
the plastic.

3

Advertising
This manual is related to the following products: